Master networking —
hands-on, before the rack.
The Network Lab is an interactive Simulation & Training Suite for data networks: a switch, a router and a length of cable, in your browser. Build the topology, plug the ports, and watch the protocol do what the textbook only describes.
From the frame to the name
Six tracks that follow a packet the whole way — switched, routed, addressed, filtered, carried across the WAN, and finally read straight off the wire.
Switching · L2
VLANs, trunks, the spanning tree and the aggregated bundle — the campus fabric, and the ways it fails.
See the modules Track L3Routing · L3
Static routes, OSPF, the classic protocols side by side, and label switching over the same routed core.
See the modules Track IPIP Addressing & Services
Subnets and VLSM, DHCP, NAT and DNS — the address on the packet, and the name written above it.
See the modules Track SECSecurity
Access lists, 802.1X, IPsec tunnels and stateful firewalls — who gets through, and what the tunnel hides.
See the modules Track WANWAN & Management
Serial links and PPP, SSH against Telnet on a wire-tap, then SNMP, syslog, NTP and QoS.
See the modules Track WLSWireless & Tools
Association and the WPA handshake, a free-build topology bench, packet capture, and the console itself.
See the modulesTwenty-six modules, one rack
Every module names the standard it follows and runs entirely in the browser. Access is issued per account — sign in and the ones your programme covers appear in your rack.
Switching · L2
Frames, VLANs and the loop-free tree that keeps a campus alive.
VLANs & Trunking (802.1Q)
Tagged trunks, access ports and broadcast-domain isolation.
Inter-VLAN Routing
Router-on-a-stick with sub-interfaces — the first hop between VLANs.
Spanning Tree (STP/RSTP)
Root election, port roles, a blocked port, and what a broadcast storm does.
Link Aggregation (LACP)
Bundle mode matrix, hash-based load balancing and member failover.
Port Security
Max MACs, sticky vs static, shutdown / restrict / protect, and a MAC flood.
Routing · L3
How a packet is handed from one network to the next — and who decides.
Static & Default Routes
Two routers across a WAN link, with routing tables built by hand.
OSPF
Dynamic routing, the SPF run, and reconvergence after a link drops.
Routing Protocols Compared
RIP · RIPv2 · IGRP · EIGRP · BGP side by side — metric and administrative distance.
MPLS Lab
Label switching end to end: LSPs, label stacks, fast reroute and L3VPN.
IP Addressing & Services
Addresses, the services that hand them out, and the names on top.
Subnetting & VLSM
Bit-block visualisation with narrated steps from prefix to usable range.
DHCP (server / relay)
Discover / Offer / Request / Ack animated, then relayed across a router.
Static IP
Plug the cable, set an address, and watch ARP and ping resolve.
NAT / PAT
Static, dynamic pool and PAT overload with a live translation table.
DNS
Recursive walk over root / TLD / authoritative, caching and CNAME chains.
Security
Who gets through, who gets logged, and what the tunnel hides.
Standard / Extended ACLs
Permit and deny, first match wins, the implicit deny, and shadowed rules.
AAA · 802.1X
EAPOL / EAP / RADIUS walk, port authorised or held, MAB and fallback VLANs.
Site-to-Site VPN (IPsec)
IKE phase 1 and 2, PSK, transform sets and an ESP tunnel over the WAN.
Firewall Basics
Stateful inspection, security zones and the connection table.
WAN & Management
The long links, and the protocols a NOC actually runs on.
WAN · PPP · Serial
Serial encapsulation, PPP LCP/NCP, PAP vs CHAP, and an encapsulation mismatch.
SSH / Telnet
What a wire-tap sees: cleartext vs encrypted management, host keys, MITM.
SNMP · Syslog · NTP
SNMP get/set/trap, syslog severities and NTP stratum sync.
Quality of Service (QoS)
Classify, mark DSCP, priority/LLQ and CBWFQ guarantees against plain FIFO.
Wireless & Tools
Joining the air — plus the bench tools you reach for on every fault.
Wireless · WLAN · WPA
Association, the WPA2 four-way handshake, WPA3 SAE, and who else can read the air.
Topology Builder
A free-build bench: drop devices, patch them together, ping across the result.
Packet Capture (sim mode)
Display filters, layered decode and follow-stream — reading a trace like an engineer.
CLI Terminal
The DA-NOS console, with a mode map and narrated command results.
Build it, break it, read the trace
Every module follows the same four beats, so the twenty-sixth one feels like the first.
Build the topology
Drop switches, routers, servers and hosts onto the bench and lay them out the way your site really looks.
Plug the cables
Pick a port, pick a port. The link comes up — or it tells you exactly why it did not.
Watch the protocol
Frames, elections, handshakes and tables animate on a server-generated timeline, narrated step by step.
Read the capture
Open the trace, filter it, follow the stream — and prove what actually happened on the wire.
Train on real protocol behaviour
Build the instinct before an outage builds it for you.
Standards-referenced
Behaviour follows the RFC and IEEE standards each module cites — not a cartoon of them.
Risk-free practice
Misconfigure it, storm it, cut the link. Reload and try again — nothing here is in production.
Anywhere, any device
Runs in the browser, light or dark, on a 27-inch display or on a phone.
Built for training
A narrated timeline and a fidelity panel on every module: what is modelled, and what is deliberately not.
Engineered by Daw Alfada
The Network Lab is built by Daw Alfada, the company behind the fiber-optic product line — patch cords, PLC splitters, WDM components and transceivers for the networks of tomorrow.
It is the second lab in the Simulation & Training Suite: where the Fiber Optic Lab covers the glass, this one covers everything that rides on it.
Daw Alfada™ is a registered trademark, approved by the Iraqi Ministry of Industry & Minerals, the ITPC and the CMC.
Step into the network lab
The full Simulation & Training Suite is available to registered users. For access, a guided pilot, a demo, or hands-on engineer training, talk to us.
Log in